PC MANUAL

PC Build and Manual (part2-3)
You will provide a comprehensive and detailed manual documenting the step-by-step process for building a computer using the components provided in LabSim 14.1: “Build a Computer from Scratch.” The manual will be used by entry-level technicians, so it should be clear, concise, and formatted using the IEEE citation style, from LabSim 14.1. Your manual should be similar to step-by-step instructions on How to Change the Oil in Your Car. Keep in mind that your manual will be used as a guide for new technicians.The manual will be submitted in three separate parts. Part 1 addresses Sections 1-5 of the overall manual, Part 2 addresses Sections 6-10, and Part 3 addresses Sections 11-12.
I ONLY NEED PART 2 AND 3 FOR THIS ASSIGNMENT.
PC Build & Manual Part 2:
6. Installing Hard Drive (LabSim 5.2)
7. Installing Optical Drive (LabSim 5.3)
8. Installing Video Card (LabSim 3.12) you will need to use the PCIe video card that supports HDMI in lab 3.11.4. This lab is also good for capturing screen shots for the manual.
9. Connecting Monitors, Keyboard, and Mouse (LabSim 4.0)
10. BIOS Configuration (LabSim 3.10)
PC Build & Manual Part 3:
11. Installing Windows 10 (LabSim 10.3)
12. Configuring Critical Windows Features (10.0, 11.0 12.0, and 13.0)

Computer Requirements
• use the motherboard provided on the shelf
• appropriate power supply that support the motherboard
• fastest processor possible (available on the shelf and compatible with the motherboard)
• maximum memory possible You will have two sticks of DDR4 that should be used and configured in dual channel mode.
• single hard drive
• single CD-DVD drive
• single video card
Manual Sections
In addition to including the sections listed below, your manual should
• address the environment in which the computer build will take place. For example, what are the best practices when working in a carpeted room?
• not use computer jargon. Although the manual will be used to train new technicians, it may also be used by someone with limited computer knowledge, so the manual must be easy to understand.
• include explanations on methodology. For example, why is it important to use an antistatic grounding bracelet when working with the computer? Or why is it important to install memory sticks in pairs?
The overall manual are as follows:

6. Installing Hard Drive (LabSim 5.2)
7. Installing Optical Drive (LabSim 5.3)
8. Installing Video Card (LabSim 3.12)
9. Connecting Monitors, Keyboard, and Mouse (LabSim 4.0)
10. BIOS Configuration (LabSim 3.10)
11. Installing Windows 10 (LabSim 10.3)
12. Configuring Critical Windows Features (LabSim 9.0, 10.0, 11.0, 12.0 and 13.0)