preliminary overall design of hydro-power scheme

Firstly, the report should start with the introduction which should include:
1. Hydro-power scheme importance and its impact on the environment and what it is used for in general. Then it should explain the development of the hydro-power in the specified area as its discussed in the uploaded files (page 1, introduction part) i.e. talk about the features of the area and the development of the hydro-power in this area as well as the reason behind the development of the hydro-power. furthermore, what are the proposal for development of the area.
2. The design objectives. which also outlined in the uploaded files (page 1, design objectives part) i.e. this part should explain the objectives of the design and what is required to achieve the development of the hydro-power scheme.
The second part of the report is about the reservoir storage: (page 5, storage requirements part) i.e. this chapter should include the design method used to design the storage requirements and the importance of calculating and determining the requirements of the storage. In addition, this part should talk about the rate of the reservoir filling with sediments and the lost volume of the reservoir (page 5, under estimation of the rate part) i.e. it should explain the importance of calculating the rate of the reservoir filling with sediments and the lost volume, the method used to calculate the rates and the empirical formulas used.
The third part of the report is about the turbine specifications which should include:
1. The design method or installation methods used to install the four Francis Turbines for the purpose of a hydro-power design and why for example this method is best among other methods. The efficiency of the four Francis turbines and what speed each should run at and their advantages. The advantages of using 4 turbines instead of using 1 or 2 with mentioning some reasons behind the use of 4 turbines instead of 1 or 2 ( for example; maintenance and so on). Differences between Pelton and Francis turbines in terms of efficiency and the speed each can run at.
2. Health+ safety regarding the installation of the Francis turbine and its design for the purpose of developing a hydro-power scheme.
3. Ethics
4. Cost+budgeting regarding the design of four Francis Turbines
5. A sketch that shows the size of a Francis Turbine and its dimensions (the dimension are included in the uploaded file) i.e. draw a sketch that shows the dimensions of the turbine house size using the uploaded data. Also, a figure that shows the number of turbines plotted agains the efficiency of speed of each number (using the uploaded calculations, excel file) i.e. (one number of turbine run at speed, two numbers of turbines run at speed, etc)
Last part of the report is the references.